Automatic asphalt softening point is M313112 test

Automatic asphalt softening point test device type: CN61M/SYD-2806 H (special offer)

CN61M/SYD-2806 H automatic asphalt softening point is the test of the People's Republic of China standard GB/T4507 the petroleum pitch softening point of measurement of the requirements of the design and manufacture, apply to road asphalt, asphalt, coal oil liquid petroleum pitch and other kinds of asphalt softening point, is the determination of the asphalt production enterprise, highway, bridge construction unit and the relevant universities and research institutions of selecting the instrument.

CN61M/SYD-2806 H automatic asphalt softening point test device is the company CN61M/SYD-2806 H and CN61M/SYD-2806 G type two kinds of automatic asphalt softening point of the test upgrade the product. The instrument is controlled by computer fully, electronic photoelectric measuring, liquid crystal display (LCD display, micro printer automatic printing test results. The instrument is also has temperature heating linear, bath fluid mixing, can the same test four sample, automatic check sample softening point features. A high degree of automation, test fast and convenient, test results, high efficiency and reliable test is softening point of intelligent test asphalt instrument.

The main technical parameters

1, the power supply voltage: AC 220 V (+ 10%, 5%), 50 Hz AC;

2, measurement range: (1) the sample in 80 ℃ softening point of the following person, do with distilled water heating medium, + 5 ℃ ~ + 80 ℃;

(2) the sample in 80 ℃ above the softening point, with glycerin do heating media, + 32 ℃ ~ + 160 ℃;

3, temperature resolution: 0.01 ℃;

4, mixer, stirring speed can be adjusted continuously;

5, heating rate: after three minutes 5.0 + /-0.5 for automatic adjustment ℃ / min;

6, softening point results: liquid crystal display and printers print;

7, heating power: 600 W;

8, computer interface: RS 232 C communication interface;

9, 1000 ml beaker effective volume:;

10, environmental conditions: room temperature less than 35 ℃ and relatively stable, no air convection phenomenon;

11, relative humidity: 85% or less;

12, the power consumption: no more than 700 W.

Features:

1. Through the reliable photoelectric control circuit, the automatic detection and record the softening point;

2. Advanced computer control technology, guaranteed that heat at a rate of + /-0.5 ℃ / min;

3. The LCD screen have the time and temperature readings, the birth rate surveillance temperature.