M263123 standard configuration:
10um Particulate Monitor
Hand held aerosol monitor. Concentration range: .01-200 mg/m3
Complete with battery charger and carrying case.
M263123 Respiratory Particulate Air Monitor model w263123 is a real-time dust monitor designed for industrial hygiene, indoor air quality and haz-mat air monitoring investigations.
The M263123 uses infrared technology which provides accurate and instantaneous data on airborne particle concentrations, in accordance with NIOSH method #0600.
The M263123 saves money by eliminating repetitious and costly gravimetric air sampling and the associated time delays involved with laboratory analysis. With the M263123 your results are determined easily and immediately.
By continuously monitoring lung damaging particles the M263123 protects the health of industrial personnel and reduces any potential liabilities, in addition to reducing the cost of your air monitoring program.
Applications
Determining level of respiratory protection
Survey of workplace for OSHA/EPA compliance
Quantifying off site particulate migration
Surveying for PM-10 and Total Suspended Particles (TSP) levels
Monitoring dust generation during drilling/excavation operations
Evaluating dust suppression and engineering controls
Locating and identifying "Hot Spots"
Emergency response & SARA Title III fugitive emissions compliance
Evaluating worker exposure to airborne contaminants
Dust collector/ventilation system checks
Monitoring lung damaging particulates in factories & buildings
Can be used in all OSHA & EPA personal and ambient particulate air sampling applications
The M263123 is user-friendly and easy to set up. As soon as you turn the instrument on the unit is already sampling for dust. The high sensitivity range is sensitive enough to monitor all OSHA/NIOSH reference methods. Sensitivity goes down to 0.01 mg/m³. The w263123 has an abundance of features.
Easy operation
High Sensitivity range as low as .01 mg/m³
Alarm pre-set
Low battery indicator
Optional Data Logger (model w263123-10)
Light Weight with a rugged construction with no reason to worry if the instrument gets dropped accidentally
The unique design provides protection against RFI/EMI waves (emitted from radios, transmitters, etc.)
Optional tri-pod stand, no need to carry the w263123 around
Specifications
Display: LCD 3.5 digits mg/m³ concentration reading
Calibration: NIOSH method 0600 using Arizona Road Dust test dust
Sensing range: 0.01-200 mg/m³
Particle size range: 0.01-50 µm
Precision: +/- 0.02 mg/m³
Accuracy: +/-10% to NIOSH 0600
Power: NiMH rechargeable battery
Operating time: >8 hours
Charging time: 10-12 hours
Signal output: 0-2 Volt
Humidity: 95% non-condensing
Dimensions: 9" x 3" x 1.5"
Weight: 2 lbs.
optional:
Data Logger Model w263123-10 Specifications
The optional Data Logger model w263123-10 is a single channel, 4 key programmable operation. Real-Time clock display with on screen calculation of statistics.
Recording Time: 1 minute to 12 hours
Sampling Rate: 1 or 2 sec/sample
Display: 4/20 alphanumeric LCD, on screen data display,
TWA, STEL, Max and Min concentration, start stop time
Memory: 21,500 data points
Output: RS-232, 9600 baud
Battery: 7.2v NiMH
Operating time: 12 hours
Dimensions: 5.5" x 3.5" x 2.0"
Weight: 2 lbs.
Recommended Accessories
w263123-01Calibration Standard
w263123-02 Zeroing Accessory
w263123-03 Tripod Stand
w263123-04 Cleaning Kit
|
|
|
|
|
